Dek-Shell 1-Part Moisture Cured Aliphatic Urethane Enamel

1-Part Moisture Cured Aliphatic Urethane Enamel

Dek-Shell 1-Part Moisture Cured Aliphatic Urethane Enamel is a high gloss, high performance industrial coating, specially formulated to provide outstanding durability and unsurpassed chemical resistance in a variety of interior and exterior commercial and industrial environments. Its special formulation provides excellent alkali, acid, solvent and salt spray resistance. It provides excellent hardness, durability, resistance to abrasion and impact abuse. It is an excellent high gloss finish can be applied direct to concrete or as a clear coat over a color chip epoxy floor system.

Recommended Substrates

Properly prepared concrete floors
Epoxy color chip decorative floor systems
Showrooms, warehouses, laboratories, cafeterias or any floor requiring additional chemical and abrasion resistance.

Product Features

Moisture cured aliphatic urethane formula
Impact & abrasion resistant
Good UV stability
Solvent and chemical resistant
Direct to properly prepared concrete

Product Limitations

This product is for use on properly prepared floors and above grade vertical substrates.
Do not apply if air, product & substrate temperature is <50° or >100° F.
Expect longer dry times at lower temperatures & low relative humidity
Clarity of color may be affected by high humidity, low temperatures, chemical exposure or exposure to lighting such as sodium vapor lights.
A moisture barrier is required when applied on grade.
Always test floor cleaners for ill effects before widespread use.

{{menu[activeItem].label}}

Dek-Shell 1-Part Moisture Cured Aliphatic Urethane Enamel

1-Part Moisture Cured Aliphatic Urethane Enamel

© 2025 Florida Paints. All rights reserved.